If you have tried multiple tanning beds and you have not gotten a dark color, then there are several things you can try. First, make sure you don't wear heavy lotions or oils before going into the tanning bed. If you shaved within the previous 48 hours, the tanning session, you can also block your pores by shaving with a blunt razor. Ultimately, your body will not get darker if you don't do the right things.
Exfoliation
If you're concerned that your tan isn't showing, you should try exfoliating your skin before stepping into the tanning bed. Exfoliating your skin helps clear the pores of dead skin cells, allowing the UV rays to penetrate more deeply and evenly. Besides, dead skin cells can interfere with the tanning process, leading to streaks and blotches.
First and foremost, protect your skin from the sun's harmful UV rays by wearing sun protection clothing and wearing a hat. Also, wear sunscreen, which is especially important for people who spend lots of time outdoors after you've exfoliated, and shower with a fragrance-free soap to remove dead skin cells and promote an even tan.
Another common home remedy for exfoliation is lemon juice. However, lemon juice is abrasive, so be careful not to apply it undiluted. Lemon juice contains chemicals that can cause chemical burns and make your skin more sensitive to the harmful effects of UV light. You're better off applying a moisturizing lotion after the tanning bed to ensure that the tan will last longer.
Another solution is to apply a moisturizing lotion before tanning. While exfoliating is crucial before tanning, it's just as important afterward. Exfoliation removes dead skin cells, so the tanning light will be able to penetrate deeper into your skin. Exfoliating can be as simple as a sea salt scrub, but it may be too harsh for sensitive skin.
Aside from exfoliation, another method of exfoliation involves using a brush or a soft washcloth. A soft washcloth is good for people with dry skin. More aggressive methods are suitable for people with oily skin or thicker skin. To avoid damaging your skin, use a moisturizer after exfoliating. Moisturizers with aloe are ideal.
Lamps
One of the most common complaints of tanning salon owners is that their beds are not getting darker despite using the right lamps. The temperature of the room can affect tanning bed performance. Even though the air temperature is only slightly affected, it cuts ultraviolet light output exponentially. To maximize tanning bed performance, it is essential to preheat the bed. Also, the lamps cannot work at their maximum output without a preheating system.
The temperature inside the tanning bed-chamber can reach up to 150 degrees. The cooling fan may be defective, which will result in the other expensive parts of the tanning bed failing. However, replacing the cooling fan only costs about $40. Then, your results may vary, and you'll need to visit the tanning salon frequently. If you're not getting darker in the tanning bed, try to visit a different one.
The International Electrotechnical Commission (IEC) has a standard for tanning lamps. It requires sunbeds to conform to the IEC 60335-2-27 standard. The listed lamp wattage is equivalent to the IEC 60335-2-27 standard. This code is found on sunbeds and commercial and home tanning salons. The tanning salon must-have lamp equivalency to ensure proper safety and quality.
Lotion
The answer is in your skincare routine. Before entering the tanning bed, drinking water before tanning and applying a high-quality tanning accelerator are important steps. This non-greasy, paraben-free formula is easy to apply, absorbs quickly into the skin, and contains moisturizing oatmeal, mango seed butter, and aloe. This product ensures that your skin looks its best while spending time in the bed.
When applying tanning lotion, make sure that you start at the bottom of the feet and work your way up. Don't apply too much lotion, or you'll have a white layer of lotion all over your body. Once applied, massage it thoroughly to ensure that it's fully absorbed. You'll probably need to reapply the lotion a few times during your tanning session, so make sure you know where to apply it.
Regular lotions may damage the machine. Moreover, regular lotions don't offer the same protection as tanning bed lotions. Try using a tanning lotion designed specifically for tanning beds. The benefits of these lotions are more noticeable and long-lasting. You can apply it before tanning to get the best results. This video explains selecting the right lotion and preparing yourself for the bed.
Applying tanning lotion before entering the tanning bed can help you achieve a golden bronze finish. Apply it 30 minutes before your indoor session. After a few minutes, you'll have your desired golden bronze. This process will give you more golden bronze than just sunbathing alone. It might take up to 50 minutes to achieve the same results as one or two tanning sessions, but you'll be amazed at how quickly you'll get results!
Time limit
While a time limit may not seem necessary when you're new to tanning, it is important to follow this guide if you have fair skin. You should start by using a five-minute session and increase the duration of your sessions by one minute each week. Even if it seems counterintuitive, this is better than sunburning your skin. You can also refer to the tanning bed's time chart to determine shorter sessions and avoid overexposure.
Depending on the type of your skin, you may want to extend your time in the tanning bed each week. However, the longer your session, the darker you'll get. If you're worried about sunburning your skin, you can take a skin-type quiz. It only takes a minute to answer a few questions. It is also good to check the tips for fair skin when tanning.
Generally, people have a two-hour waiting time between sunbathing and showering. But if you're using a tanning bed without tanning lotion, you can shower afterward and get a darker tan in about 10 minutes. You may be able to get a darker tan in the sun without a time limit. Unless you're using a tanning lotion, you should avoid sunbathing within two hours. Aside from this, it's a good idea to use an SPF sunscreen after your tanning session.
FAQ
How do I get darker in the tanning bed?
To get darker in the tanning bed, you need to expose your skin to more UV light. This can be done by increasing your session time or using a higher-powered bed. You can also increase your melanin production by using a bronzer or self-tanner before tanning.
Why isn't my face tanning in a tanning bed?
There are a few reasons why someone's face might not tan in a tanning bed. One reason is that the person may be using sunscreen on their face, which will block the UV rays from tanning the skin. Another reason is that the person may naturally tend not to tan very easily, or they may have lighter skin tones that don't tan as easily as darker skin tones.
What level of tanning bed gets you the darkest?
No one-level tanning bed will get you the darkest. Different people will achieve different levels of darkness, depending on their skin type and how often they tan.
How do you overcome a plateau in tanning?
You can do a few things to overcome a plateau in tanning. First, make sure you're using a high-quality sunless tanning product and applying it evenly. Second, try using a bronzer to add some color to your skin. Third, increase your time in the sun or tanning bed; if you've been tanning for a while, your body may have become used to the level of UV exposure.
What vitamins help you tan faster?
There is no evidence that any vitamins help you tan faster. The best way to get a tan is to expose your skin to UV radiation from the sun or a sunlamp.
How long does it take to get a tan in a tanning bed?
It depends on your skin type. It usually takes around 10 sessions for people with light skin to get a noticeable tan. For people with darker skin, it can take up to 20 sessions.
Image source: lesalon.com
